RAE Systems ToxiRAE II Personal Single-Gas Monitor - HCN, 0-100 PPM - 045-0517-000
Item #:
045-0517-000
Brand:
RAE Systems
Share this product:
045-0517-000 ToxiRAE II Personal Single-Gas Monitor - HCN, 0-100 PPM by RAE Systems
The ToxiRAE II is a full-featured personal clip-on gas monitor that provides a continuous display of the gas concentration, STEL, TWA and peak values for over 10 toxic gases and oxygen deficiency or enrichment hazards.
ToxiRAE II package includes
- ToxiRAE II detector with sensor as specified (sensors are not replaceable or interchangeable)
- Operation and maintenance manual
- Rugged stainless steel alligator clip (installed)
- Calibration gas test adapter
- High-capacity Lithium battery installed
Key Features
- One-button operation
- Field-replaceable filter and battery
- Field-replaceable sensor in Europe and Asia only
- Unmistakable alarm notification: bright red flashing LED, loud 90 dB buzzer, powerful vibration
- Designed to meet IP-65 specifications
- Highly resistant to EMI/RFI. Compliant with EMC Directive 89/336/EEC
- Durable, highly impact-resistant, carbon-loaded ABS housing
- Stainless-steel corrosion-resistant alligator clip
- Multiple sensors available to cover a variety of applications, including: H2S, CO, O2, NH3, CI2, CIO2, HCN, NO, NO2, PH3, and SO2 sensors
- Hands-free use: clips onto a hardhat, shirt pocket, shoulder strap, or belt
- Displays STEL, TWA, peak values, and alarm minutes used
Applications
- Oil and gas
- Chemical plants
- Fire service
- Industrial safety
- Pulp and paper
- Waste-water treatment plants
- Landfill operations
- Power plants
- Steel mills
| Size | 3.6" x 1.9" x 0.9" (9.3 cm x 4.9 cm x 2.2 cm) |
| Weight | 3.6 oz (102 g) with clip |
| Battery | User-replaceable 2/3 AA high-capacity Lithium battery (use only RAE Systems batteries). |
| Operating Period | 2 years typical battery life when used 8 hours/day with less than 5 minutes of alarms per day. |
| Display | Easy-to-read LCD continuously displays gas concentration and text messages |
| Keypad | One-button operation |
| Direct Readout | - Instantaneous display of toxic gas concentration in ppm (or oxygen in Vol %) - STEL, TWA, and Peak values - Alarm minutes consumed |
| Alarms | - Audible: 90dB at 10 cm - Visible: Bright red/green LED bar visible from top, front, and sides - Sensory: Built-in vibration alarm - High: Displays "High," emits 3 beeps and flashes every 3 seconds - Low: Displays "Low," 2 beeps and flashes every 3 seconds - STEL: Displays "STEL," 1 beep and flash every 3 seconds - TWA: Displays "TWA," 1 beep and flash every 3 seconds - Low battery: Displays empty battery symbol, 1 beep per minute |
| Calibration | Two-point field calibration |
| Temperature | -40° to 131° F (-40° to 55° C) for O2, CO, and H2S. For specific temperature ranges for other sensors, please reference RAE Systems Technical Note TN-114 |
| Humidity | 0 to 95% relative humidity (non-condensing) |
| EMI/RFI | Highly resistant to EMI/RFI. Compliant with EMC Directive 89/336/EEC |
| IP Rating | Engineered to meet IP-65 specifications |
| Hazardous Area Approval | - UL/cUL Classified as Intrinsically Safe for use in Class I Division 1, Groups A, B, C, D - Hazardous Locations T5 rating (UL/cUL, ATEX) - ATEX, II 1G, EEx ia IIB T5, or II 2G, EEx ia IIC T5 - CE Mark, European Conformity - IECEx Ex ia IICT4 |
| Attachments | Stainless steel alligator clip (installed), wrist strap |
| Warranty | 2-year warranty for instruments with O2, CO, and H2S sensors (1 year for all others) |
| Gas Monitor | Range | Resolution |
| Ammonia (NH3) | 0 to 50 | 1 |
| Carbon Monoxide (CO) | 0 to 500 | 1 |
| Carbon Monoxide (CO) | 0 to 1999 | 10 |
| Chlorine (Cl2) | 0 to 10 | 0.1 |
| Chlorine Dioxide (ClO2) | 0 to 1 | 0.01 |
| Hydrogen Cyanide (HCN) | 0 to 100 | 1 |
| Hydrogen Sulfide (H2S) | 0 to 100 | 1 |
| Nitric Oxide (NO) | 0 to 250 | 1 |
| Nitrogen Dioxide (NO2) | 0 to 20 | 0.1 |
| Oxygen (O2) | 0 to 30% | 0.1% |
| Phosphine (PH3) | 0 to 5 | 0.01 |
| Sulfur Dioxide (SO2) | 0 to 20 | 0.1 |
