RAE Systems ppbRAE 3000+ Portable Handheld VOC Monitor - CSA, PID 10.6 eV Lamp 1/2" for Total VOC mode only, Rechargable Li-ion Battery, Universal Adapter, BLE Data transmission, Calibration Kit - 059-C11D-100
Item #:
059-C11D-100
Brand:
RAE Systems
Share this product:
059-C11D-100 ppbRAE 3000+ Portable Handheld VOC Monitor - CSA, PID 10.6 eV Lamp 1/2" for Total VOC mode only, Rechargable Li-ion Battery, Universal Adapter, BLE Data transmission, Calibration Kit by RAE Systems
The compact ppbRAE 3000 + is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 + is one of the most advanced handheld VOC monitors available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.
The built-in wireless modem allows real-time data connectivity with the command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the detector.
- Accurate VOC measurement in all operating conditions
- Easy access to lamp and sensor in seconds without tools
- Patented sensor and lamp autocleaning reduces maintenance
- Monitors real-time readings and location of people
- Low Cost of Ownership: 3-year 10.6 eV lamp Warranty
- BLE module and dedicated APP for enhanced datalogging function
FEATURES & BENEFITS
- 3-second response time
- Extended range from 1 ppb to 10,000 ppm with highly acute linearity
- Humidity compensation with integral humidity and temperature sensors
- Reflex PID Technology™
- Highly connectivity capability through multiple wireless module options
- Integrated Correction Factors list of 220 compounds—more than any other PID
- Includes flashlight for dark conditions
- Large graphic display presents gas type, Correction Factor and concentration
- Easy access to battery, lamp and sensor in seconds without tools
- Rugged housing withstands use in harsh environments
- IP-67 waterproof design for easy cleaning and decontamination
APPLICATIONS
- Oil & Gas
- HazMat
- Industrial Safety
- Civil Defense
- Environmental & Indoor Air Quality
MONITOR ONLY INCLUDES:
- ppbRAE 3000 + Monitor
- Wireless communication module built in, as specified
- Charging/download adapter
- Organic vapor zeroing kit
- Tedlar® bag for calibration
- Flex-I-Probe™
- External filter
- Rubber boot with straps
- Alkaline battery adapter
- Lamp-cleaning and tool kit
- Soft leather case
MONITOR WITH ACCESSORIES KIT:
- Hard transport case with pre-cut foam padding
- Charging/download cradle
- 5 Porous metal filters and O-rings
- Gas outlet port adapter and tubing
OPTIONAL CALIBRATION KIT ADDS:
- 10 ppm isobutylene calibration gas, 34L
- Calibration regulator and flow controller
OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:
- 4-year repair and replacement warranty
- Annual maintenance service
Size | 10" L x 3.0" W x 2.5" H (25.5 x 7.6 x 6.4 cm) |
Weight | 26 oz (738 g) |
Sensors | Photoionization sensor with standard 10.6 eV or optional 9.8 eV lamp |
Battery | - Rechargeable, external field-replaceable Lithium-Ion battery pack - Alkaline battery adapter |
Operating Hours | 16 hours of operation (12 hours with alkaline battery) |
Display Graphic | 4 lines, 28 x 43 mm, with LED backlight for enhanced display readability |
Keypad | 1 operation and 2 programming keys, 1 flashlight on/off |
Direct Readout | Instantaneous reading - VOCs as ppm by volume or mg/m3 (3 in upper case for cubic) - STEL, TWA and PEAK - Battery and shutdown voltage - Date, time, temperature |
Alarms | - 95 dB at 12" (30 cm) buzzer and flashing red LED to indicate exceeded preset limits - High: 3 beeps and flashes per second - Low: 2 beeps and flashes per second - STEL and TWA: 1 beep and flash per second - Alarms latching with manual override or automatic reset - Additional alarm for low battery and pump stall |
EMC/RFI | Highly resistant to EMI/RFI Compliant with EMC Directive 89/336/EEC |
IP Rating | - IP-67 unit off and without flexible probe - IP-65 unit running |
Datalogging | Standard 6 months at one-minute intervals |
Calibration | Two-point or three-point calibration for zero and span |
Sampling Pump | - Internal, integrated flow rate at 500 cc/min - Sample from 100' (30m) horizontally or vertically |
Low Flow Alarm | Auto pump shut-off at low-flow condition |
Communication & Data Download | - Download data and upload instrument set-up from PC through charging cradle or using BLE module and dedicated APP - Wireless data transmission through built-in RF modem |
Wireless Network | Mesh RAE Systems Dedicated Wireless Network |
Wireless Range (Typical) | Up to 15 ft (5m) for BLE EchoView Host: LOS > 660 ft (200 m) ProRAE Guardian & RAEMesh Reader: LOS > 660 ft (200 m) ProRAE Guardian & RAELink3 Mesh: LOS > 330 ft (100 m) |
Safety Certifications | • US and Canada: UL, cUL, Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D • Europe: ATEX Ex II 2GEx ia IIC/IIB T4 • IECEx: Ex ia IIC/IIB T4 |
Operating Temperature | -4° to 113° F (-20° to 50° C) |
Humidity | 0% to 95% relative humidity (non-condensing) |
Attachments | Durable black rubber boot with straps |
Warranty | 3 years for 10.6 eV lamp, 1 year for pump, battery, and instrument |
Wireless Frequency | ISM license-free band. IEEE 802.15.4 Sub 1GHz IEEE 802.11 bands b/g 2.4 GHz |
Wireless Approvals | FCC Part 15, CE R&TTE, Others |
Radio Module | Supports Bluetooth or RM900 or BLE |
Gas Monitor | Range (ppm) | Resolution (ppm) | Response Time (T90) |
VOCs | 0 to 9999 ppb 10 to 99 ppm 100 to 999 ppm 1000 to 9999 ppm |
1 ppb 0.01 ppm 0.1 ppm 1 ppm |
< 3 sec < 3 sec < 3 sec < 3 sec |